Brother MFC-9125CN - Storing Speed Dial numbers

Control panel setup
55
6
Set to Default (MFC-9325CW only) 6
The Set to Default allows you to reset each wired or wireless settings to the factory default. If you want
to reset both wired and wireless settings, see Restoring the network settings to factory default on page 71.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c (For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d Press a or b to choose Set to Default.
Press OK.
e Press 1 to choose Reset.
f Press Stop/Exit.
Wired Enable (MFC-9325CW wired network only) 6
If you want to use the wired network connection, set Wired Enable to On.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose Wired LAN.
Press OK.
d Press a or b to choose Wired Enable.
Press OK.
e Press a or b to choose On or Off.
Press OK.
f Press Stop/Exit.