Brother MFC-9125CN - Printing the Network Configuration List

Control panel setup
72
6
Printing the Network Configuration List 6
Note
Node name: Node name appears on the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a (For MFC-9325CW) Press Menu. Press a or b to choose Print Reports. Press OK.
(For MFC-9125CN) Press Reports.
b Press a or b to choose Network Config.
Press OK.
c Press Black Start or Color Start.
Note
If the IP Address on the Nework Configuration List shows 0.0.0.0, wait for one minute and try again.