Brother MFC-9125CN - Page 68

Control panel setup
57
6
Setup Server 6
SMTP Server 6
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose SMTP Server.
Press OK.
f Press a or b to choose Name or IP Address.
Press OK.
g Enter the SMTP server address (up to 64 characters).
Press OK.
h Press Stop/Exit.
SMTP Port
6
This field displays the SMTP port number (for outgoing E-mails) on your network.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose SMTP Port.
Press OK.
f Enter the SMTP port number.
Press OK.
g Press Stop/Exit.