Brother MFC-9125CN - Retrieving fax messages

Control panel setup
62
6
Header 6
This selection allows the contents of the mail header to be printed when the received message is printed.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Mail RX.
Press OK.
e Press a or b to choose Header.
Press OK.
f Press a or b to choose All, Subject+From+To or None.
Press OK.
g Press Stop/Exit.
Del Error Mail
6
When set to On, the machine automatically deletes error mails that the machine cannot receive from the POP
server.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Mail RX.
Press OK.
e Press a or b to choose Del Error Mail.
Press OK.
f Press a or b to choose On or Off.
Press OK.
g Press Stop/Exit.