Brother MFC-9130CW Quick Setup Guide

3
2
Remove the packing
material from the
machine
CAUTION
CAUTION
DO NOT eat the silica gel pack, please throw it
away. If ingested, seek medical attention
immediately.
a Remove the packing tape from the outside of
the machine, the silica gel pack on the support
flap and the film covering the scanner glass.
b Fully open the top cover by lifting the handle up
a.
c Slide all eight yellow drum locks in the direction
of the arrows (the locks may require a firm
push).
d Take out all four drum and toner cartridge
assemblies.
e Remove the orange packing piece from the belt
unit.
IMPORTANT
DO NOT connect the AC power cord yet.
IMPORTANT
To avoid print quality problems, DO NOT touch
the shaded part shown in the illustration.

Brother MFC-9130CW Specifications

Printing

print speed black	up to 19 ppm
print speed color	up to 19 ppm
print resolution	up to 600 x 2400 dpi
print technology	Digital Color LED

Copying

copy speed black	up to 19 cpm
copy speed color	up to 19 cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11.7”
scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi

Faxing

fax modem	33.6 kbps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
large paper capacity	250-sheet capacity paper tray

Display

lcd display type/size	3.7” Color TouchScreen
touchscreen display size	3.7 inches

Memory

standard memory	192MB
maximum memory	192MB