Chapter 1
4
Sleep Mode 1
The Sleep Mode Setting can reduce power
consumption. When the machine is in Sleep
Mode (Power Save mode) it acts as though it
were turned off. Receiving data or starting an
operation wakes up the machine from Sleep
mode to Ready mode.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax, computer data or
makes a copy, the timer will be reset. The
default setting is 3 minutes.
While the machine is in sleep mode the LCD
will show Sleep.
a Press Menu, 1, 4, 2.
14.Ecology
2.Sleep Time
003Min
Enter & OK Key
b Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c Press Stop/Exit.
Deep Sleep mode 1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically and the LCD will show
Deep Sleep. Deep Sleep mode reduces
more power consumption than Sleep mode.
The machine will wake up and start warming
up, when the machine receives a fax,
computer data or makes a copy or when you
press a key on the control panel.
(For MFC-9560CDW only) If a wireless
network is enabled, the machine does not
enter Deep Sleep mode. To disable the
wireless network, see chapter 5 in the
Network User's Guide.
LCD Contrast 1
You can change the contrast to make the
LCD look lighter or darker.
a Press Menu, 1, 6.
16.LCD Contrast
-nnonn+
Select dc&OK
b Press c to make the LCD darker. Or,
press d to make the LCD lighter.
Press OK.
c Press Stop/Exit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
