Configuring your machine for a wireless network (For MFC-9560CDW)
9
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
a Confirm your network environment. See page 11.
b Confirm your wireless network setup method. See page 12.
c Configure your machine for a wireless network. See page 16.
1
Supporting IEEE 802.1x
Wireless configuration and installing the printer driver have been completed.
Infrastructure mode
Connected to a computer with a WLAN access
point/router
or
Ad-hoc mode See page 10
Connected to a wireless capable computer
without a WLAN access point/router
Using the
WPS/AOSS™
control panel menu
(Automatic Wireless
mode)
(Recommended)
Using the Setup
Wizard
1
from the
control panel
Using the Brother
installer
application
Using the PIN
Method of Wi-Fi
Protected Setup
Using WPS/AOSS™, a USB
1
or
network cable
1
See the Quick Setup
Guide
See the Quick Setup
Guide
See page 26 See page 24
Installing drivers and software (See the Quick Setup Guide)