Brother MFC-9460CDN Network User's Guide

Web Based Management
58
6
c Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to FTP settings using a web browser.
 Profile Name (Up to 15 characters)
 Host Address (FTP server address)
 Username
 Password
 Store Directory
 File Name
 Quality
 File Type
 File Size
 Passive Mode
 Port Number
You can set Passive Mode to Off or On depending on your FTP server and network firewall configuration.
By default this setting is On, you can also change the port number used to access the FTP server. The default
for this setting is port 21. In most cases these two settings can remain as default.
Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds