Brother MFC-9560CDW - Page 60

Chapter 6
44
Changing the Remote Codes 6
The preset Fax Receive Code is l51. The
preset Telephone Answer Code is #51. If you
are always disconnected when accessing
your External TAD, try changing the
three-digit remote codes, for example ###
and 999.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 4.
21.Setup Receive
4.Remote Codes
a On
b Off
Select ab or OK
c Press a or b to choose On (or Off).
Press OK.
d If you chose On in step c, enter the new
Fax Receive Code.
Press OK.
e Enter the new Telephone Answer Code.
Press OK.
f Press Stop/Exit.