30
For Wireless Network Users
Entering Text for Wireless Settings
Most number keys have three or four letters printed on them. The keys for 0, # and l do not have printed letters
because they are used for special characters.
By pressing the proper number key repeatedly, you can access the character you want.
For configuring wireless network settings
Putting spaces
To enter a space in a name, press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press d or c to move the cursor under the incorrect
character, press Clear. Re-enter the correct character. You can also back up and insert letters.
Otherwise press Clear to delete the character to the left, and then re-enter the correct character.
Repeating letters
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor right before
you press the key again.
Special characters and symbols
Press l, # or 0, then press d or c to move the cursor to the special character or symbol you want. Press OK to
choose it.
Press
Key
One time Two
times
Three
times
Four
times
Five
times
Six times Seven
times
Eight
times
Nine
times
2 abcABC2ab
3 de fDEF3de
4 gh iGHI 4gh
5 jklJKL5jk
6 mnoMNO6mn
7 pqrsPQRS7
8 tuvTUV8tu
9 wxyzWXYZ9
Press l for (space) ! " # $ % & ' ( ) + , - . /
Press # for : ; < = > ? @ [ ] ^ _ \ ~ ` | { }
Press 0 for 0 \ { | } ~
To Next Page
Loading...
Need help?
General
Weight and Dimensions
