EasyManuals Logo

Brother MFC-B7715DW User Manual

Brother MFC-B7715DW
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
4-2
Confidential
1.1 Installing Firmware (Sub firmware and main firmware)
1.1.1 Checking firmware version
Check whether the firmware installed on the machine is the latest version. If it is the latest
version, there is no need to install the firmware. If it is not, be sure to install the firmware to
the machine as described in “1.1.2 Installing firmware”.
<How to check firmware version>
When the supply PCB is replaced with a new one, the machine automatically enters
maintenance mode by turning it ON so the procedure below to enter the maintenance mode
is not necessary.
For models without touch panel
(1) Press the [Menu], and then the [Start]
while the machine is in the ready
state. Then, press the [] four times
to enter the maintenance mode.
(2) Press the [] or [] to display
“MAINTENANCE 25” on the LCD, and
press the [OK]. For keypad models,
press the [2] and [5] in this order. The
main firmware version information is
displayed on the LCD.
(3) Press the [Start] to display the version
information of the sub firmware on the
LCD, and then check the version
information.
For models with touch panel
(1) Press and hold the for
approximately five seconds while the
machine is in the ready state.
(2) Press the blank field at the bottom of
the LCD.
(3) Press the [*], [2], [8], [6], and [4] on
the LCD in this order to enter the
maintenance mode.
(4) Press the [2] and [5] in this order. The
main firmware version information is
displayed on the LCD.
(5) Press the [Mono Start] to display the
version information of the sub
firmware on the LCD, and then check
the version information.
Note:
You can check the sub firmware and main firmware version by implementing “Print
maintenance information (Function code 77)” (refer to “1.3.24 Print maintenance
information (Function code 77)” in Chapter 5).

Table of Contents

Other manuals for Brother MFC-B7715DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-B7715DW and is the answer not in the manual?

Brother MFC-B7715DW Specifications

General IconGeneral
N-up printing2, 4, 9, 16, 25
Secure printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Duplex printing modeAuto
Warm-up time (from sleep mode)9 s
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)34 ppm
Duplex print speed (black, normal quality, A4/US Letter)16 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies99 copies
N-in-1 copy function (N=)2, 4
Copy speed (black, normal quality, A4)34 cpm
Scan toE-mail, FTP, File, Image, OCR
Scan driversSANE, TWAIN, WIA
Grayscale levels256
Output color depth24 bit
Scan speed (black)22.5 ppm
Scan speed (color)7.5 ppm
Output grayscale depth8 bit
Maximum scan resolution19200 x 19200 DPI
FaxingMono faxing
Fax memory400 pages
Fax coding methodsJBIG
Fax transmission speed33.6 sec/page
Digital senderNo
Printing colorsBlack
Maximum duty cycle15000 pages per month
Number of PostScript fonts66
Number of print cartridges1
Page description languagesBR-Script 3, PCL 6, PDF 1.7
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity120 sheets
Multi-Purpose tray input capacity1 sheets
Auto document feeder (ADF) input capacity50 sheets
Custom media width76.2 - 215.9 mm
Custom media length127 - 355.6 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 163 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
Multi-purpose tray media typesExecutive, Legal, Letter
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 230 g/m²
Auto Document Feeder (ADF) media weight64 - 105 g/m²
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK, WPS
Ethernet LAN data rates10, 100 Mbit/s
Mobile printing technologiesApple AirPrint, Brother iPrint & Scan, Google Cloud Print, Mopria Print Service
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOSnameresolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, CustomRaw Port/Port9100, SMTP, IPP/IPPS, FTP, SNMPv1/v2c/v3, HTTP/HTTPS, TFTP, ICMP, Web Services, SNTP
Supported network protocols (IPv6)NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, CustomRaw Port/Port9100, IPP/IPPS, SMTP, FTP, SNMPv1/v2c/v3, HTTP/ HTTPS, TFTP, ICMPv6, SNTP, Web Services
Internal memory128 MB
Sound power level (standby)30 dB
Sound pressure level (printing)49 dB
Sound pressure level (quiet mode)44 dB
Product colorGray
Market positioningHome & office
Display number of lines2 lines
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (sleep)6.2 W
Power consumption (standby)42 W
Power consumption (printing)475 W
Power consumption (average operating)- W
Energy Star Typical Electricity Consumption (TEC)1348 kWh/week
Package depth517 mm
Package width580 mm
Package height434 mm
Package weight15100 g
Quantity per pack1 pc(s)
Sustainability certificatesRoHS, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth398.5 mm
Width410 mm
Height318.5 mm
Weight12000 g

Related product manuals