Brother MFC-J1800DW - Copy a Document

Home > Copy > Copy a Document
Copy a Document
1. Make sure you have loaded the correct size paper in the paper tray.
2. Load your document.
3. Press
[Copy].
The touchscreen displays:
4. Change the copy settings, if needed.
When you load paper other than Letter size plain paper, you must change the [Paper Size] and [Paper
Type] settings by pressing [Options].
Option Description
(No. of
Copies)
Enter the number of copies in one of the following ways:
• Press - or + on the touchscreen.
• Press
to display the keyboard on the touchscreen, and then enter the
number of copies using the touchscreen keyboard. Press OK.
(Options) Press [Options] to change the copy settings for the next copy only.
When you have finished changing settings, press OK.
ID
To make an ID card copy with the [2in1 ID Vertical] layout, select the [ID]
checkbox.
Current setting
indications
Press the following icons to change these settings for the next copy only:
• Paper Size
• Paper Type
• Quality
After you have finished selecting new options, you can save them by pressing [Save as Shortcut].
5. Press [Black Start] or [Color Start].
To interrupt copying, press .
115