Home > Paper Handling > Load Paper > Unprintable Area
Unprintable Area
The unprintable area depends on the settings in the application you are using. The figures below show the
unprintable areas on cut-sheet paper and envelopes. The machine can print in the shaded areas of cut-sheet
paper only when the Borderless print feature is available and turned on.
Cut-Sheet Paper
Envelopes
Top (1)
Left (2) Bottom (3) Right (4)
Cut-Sheet 0.12 in. (3 mm) 0.12 in. (3 mm) 0.12 in. (3 mm) 0.12 in. (3 mm)
Envelopes 0.47 in. (12 mm) 0.12 in. (3 mm) 0.47 in. (12 mm) 0.12 in. (3 mm)
The Borderless print feature is not available for envelopes, 2-sided printing, Cut Print, Cut Copy and some
paper sizes, such as Legal and Executive.
When using the Cut Print or Cut Copy features, the paper cut by your machine has unprintable areas. The
values for these unprintable areas are listed against the Cut-Sheet entry in the table.
Related Information
• Load Paper
Related Topics:
• Paper Handling and Printing Problems
40
To Next Page
Loading...
