Home > Network > Network Features > Reset the Network Settings to Factory Default
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the machine's network settings to its default factory settings.
This resets all information, such as the password and IP address.
You can also reset the print server to its factory settings using Web Based Management.
1. Press [Settings] > [All Settings] > [Network] > [Network Reset].
2. The reset confirmation message is displayed. Press [OK] for two seconds.
The machine will restart.
Related Information
• Network Features
Related Topics:
• Transfer Your Faxes or Fax Journal Report
275
To Next Page
Loading...
