Brother MFC-J1800DW - Copy an ID Card on Letter or A4 Paper and Cut the Paper in Half

Home > Cut Print and Cut Copy > Copy an ID Card on Letter or A4 Paper and Cut the Paper in Half
Copy an ID Card on Letter or A4 Paper and Cut the Paper in Half
Use the Cut Copy feature to perform [2in1(ID)] copying. With the Cut Copy feature, your machine
automatically creates a layout for both sides of an ID card to be arranged on the top half of Letter paper when
you copy them, and then cuts the paper in half.
• This function is also available for A4 size paper.
• Make sure the paper size is set to Letter or A4.
• You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
1. Place the identification card face down near the upper-left corner of the scanner glass.
a
b
cd
a
a. 0.12 in. (3 mm) or greater (top, left)
b. 5.4 in. (137 mm)
c. 4.1 in. (105 mm)
d. Scannable area
2. Press
[Cut Copy].
3. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the touchscreen.
• Press
to display the keyboard on the touchscreen, and then enter the number of copies using the
touchscreen keyboard. Press [OK].
4. Press [ID].
5. To change the copy settings, press
[Options]. When you have finished changing the settings, press
[OK].
If you load A4 size paper in the tray, change [Paper Size] to [A4].
6. Press [Black Start] or [Color Start].
The machine starts scanning one side of the identification card.
141