Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Tone or Pulse Dialing Mode
Set Tone or Pulse Dialing Mode
Your machine is set for a Tone dialing service. If you have a Pulse dialing (rotary) service, you must change the
dialing mode.
This feature is not available in some countries.
1. Press
[Settings] > [All Settings] > [Initial Setup] > [Tone/Pulse].
2. Press [Tone] or [Pulse].
3. Press .
Related Information
• General Settings
Related Topics:
• Telephone and Fax Problems
439
To Next Page
Loading...
