Brother MFC-J1800DW - Page 458

Level 3 Level 4 Level 5 Descriptions
Setup Receive Remote Codes
- Answer calls at an extension or external telephone and
use codes to turn on or off the Remote Codes. You can
personalize the codes.
Auto Reduction
- Reduce the size of incoming faxes.
PC Fax Receive
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
Memory Receive
- Set the machine to forward fax messages, to store
incoming faxes in the memory (so you can retrieve
them while you are away from your machine), or the
cloud service.
If you select Fax Forward, or Forward to Cloud, you
can turn on the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of incoming
faxes.
Report Setting Transmission
- Select the initial setup for the Transmission Verification
Report.
Journal Period
- Set the interval for automatic printing of the Fax
Journal.
If you select an option other than Off and Every 50
Faxes, you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Print Fax
- - Print incoming faxes stored in the machine's memory.
Remote Access
- - Set your own code for Remote Retrieval.
Remaining Jobs
- - Check which scheduled jobs are in the machine's
memory and cancel selected jobs.
Miscellaneous Memory Security
- Prohibit most functions except receiving faxes into
memory.
Distinctive
(USA and Canada
only)
Distinctive
Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern on
the machine.
Ring Pattern
Area Code
(USA only)
- Set your 3-digit area code only if you do not dial it
within your own area code.
[Network]
[All Settings] > [Network]
Level 3
Level 4 Level 5 Level 6 Descriptions
WLAN(Wi-Fi) Find Wi-Fi
Network
- - Configure your wireless network settings
manually.
TCP/IP BOOT Method
- Select the Boot method that best suits
your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration mode.
452