Level 1 Level 2 Descriptions
(Select shortcut button.)
Edit
Change the shortcut settings.
Delete
Delete the shortcut.
[Settings] > [All Settings] > [Fax]
Level 1
Level 2 Level 3 Descriptions
Setup Receive Ring Delay
- Set the number of rings before the machine answers in Fax Only
or Fax/Tel mode.
Receive Mode
- Select the Receive Mode that best suits your needs.
Fax Preview
- View received faxes on the LCD.
Fax Detect
- Receive fax messages automatically when you answer a call
and hear fax tones.
Remote Codes
- Answer calls at an extension or external telephone and use
codes to turn the machine on or off. You can personalise the
codes.
Auto
Reduction
- Reduce the size of incoming faxes.
PC Fax
Receive
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
Memory
Receive
-
Set the machine to forward fax messages, to store incoming
faxes in the memory (so you can retrieve them while you are
away from your machine), or the cloud service.
If you select Fax Forward, or Forward to Cloud, you can turn on
the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of received faxes.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification Report.
Journal
Period
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes, you
can set the time for the option.
If you select Every 7 Days, you can set the day of the week.
Print Document
- - Print received faxes stored in the machine's memory.
Remote Access
- - Set your own code for Remote Retrieval.
Dial Restriction Dial Pad
- Set the machine to restrict dialling when using the dial pad.
Address Book
- Set the machine to restrict the dialling when using the Address
Book.
Shortcuts
- Set the machine to restrict the dialling when using a Shortcut.
Remaining Jobs
- - Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
Miscellaneous Caller ID
Type
- Switch the mode if Caller ID cannot be displayed normally.
Fax Mode
- Select the transmission process when sending/receiving the
faxes manually.
[Settings] > [All Settings] > [Network]
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method
- Select the BOOT method that
best suits your needs.
696
To Next Page
Loading...
Need help?
General
