Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN WLAN
Assistant
- - Configure your wireless network
settings using the Brother CD-
ROM.
WPS
- - Configure your wireless network
settings using the one-button
push method.
WPS w/ PIN
Code
- - Configure your wireless network
settings using WPS with a PIN.
WLAN Status Status
- View the current wireless
network status.
Signal
- View the current wireless
network signal strength.
SSID
- View the current SSID.
Comm. Mode
- View the current
Communication Mode.
MAC Address
- - View the machine's MAC
address.
Wi-Fi Direct Push Button
- - Configure your Wi-Fi Direct
network settings using the one-
button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the Group
Owner.
Device
Information
Device Name
- View your machine's device
name.
SSID
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
IP Address
- View your machine's current IP
Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection
on or off.
E-mail/IFAX
(Available after
Internet Fax (I-Fax) is
downloaded.)
Mail Address
- - Enter the email address.
(Up to 60 characters)
Setup Server SMTP Server
Enter the SMTP server name
and address.
Port
Enter the SMTP port number.
Auth. for SMTP
Select the Security method for
email notification.
698
To Next Page
Loading...
Need help?
General
