Level 1 Level 2 Level 3 Level 4 Descriptions
Wi-Fi Direct Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
I/F Enable
- - Turn the Wi-Fi Direct
connection on or off.
E-mail/IFAX
(Available after
Internet Fax (I-Fax) is
downloaded.)
Mail Address
- - Enter the email address.
(Up to 60 characters)
Setup Server SMTP Server
Enter the SMTP server name
and address.
Port
Enter the SMTP port number.
Auth. for SMTP
Select the Security method for
email notification.
SSL/TLS
Send or receive an email via an
email server that requires
secure SSL/TLS
communication.
Verify
Certification
Verify the SMTP Server
Certificate automatically.
POP3/IMAP4 Protocol
Select the protocol for receiving
an email from the server.
Server
Enter the server name and
address.
Port
Enter the port number.
Mailbox Name
Enter the mailbox name.
(Up to 60 characters)
Mailbox
Password
Enter the password to login to
the server.
(Up to 32 characters)
Select Folder
Select the specified folder in the
mailbox using the IMAP4
protocol.
SSL/TLS
Send or receive an E-mail via
an E-mail server that requires
secure SSL/TLS
communication.
Verify
Certification
Verify the Server Certificate
automatically.
APOP
Turn APOP on or off.
Setup Mail RX Auto Polling Auto Polling
Automatically check the server
for new messages.
Poll Frequency
Set the interval for checking for
new messages on the server.
Header
- Select the contents of the email
header to be printed.
Del/Read Error
Mail
- Set the machine to
automatically delete error mails.
Notification
- Receive notification messages.
715
To Next Page
Loading...
Need help?
General
