EasyManuals Logo

Brother MFC-J410 Basic User's Guide

Brother MFC-J410
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Telephone and external devices
31
6
IMPORTANT
DO NOT connect a TAD elsewhere on the
same telephone line.
Settings 6
The external TAD must be connected as
shown in the previous illustration.
a Set your external TAD to one or two
rings. (The machine's Ring Delay setting
does not apply.)
b Record the outgoing message on your
external TAD.
c Set the TAD to answer calls.
d Set the Receive Mode to
External TAD. (See Choose the
Receive Mode on page 25.)
Recording an outgoing
message (OGM) on an
external TAD 6
Timing is important in recording this
message.
a Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b Limit your speaking to 20 seconds.
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
Multi-line connections (PBX) 6
We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi line system we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator we recommend that
you set the Receive Mode to Manual.
We cannot guarantee that your machine will
operate correctly under all circumstances
when connected to a PBX. Any difficulties
with sending or receiving faxes should be
reported first to the company who handles
your PBX.
Note
Make sure the Telephone Line Type is set
to PBX. (See Setting the Telephone Line
Type on page 29.)

Table of Contents

Other manuals for Brother MFC-J410

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J410 and is the answer not in the manual?

Brother MFC-J410 Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Grayscale levels256
Image formats supportedBMP, JPG, PNG, TIF
Copier resize- %
PC free copyingYes
Maximum copy resolution1200 x 1200 DPI
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
Total number of input trays1
Card reader integratedNo
Sound pressure level (printing)50 dB
DisplayLCD
Display diagonal1.9 \
Market positioningHome & office
Maximum print size216 x 297 mm
Paper tray media typesEnvelopes, Glossy paper, Photo paper, Plain paper, Transparencies
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Dimensions (WxDxH)390 x 375 x 180 mm
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print
Compatible operating systemsWindows 2000/XP/Vista/7 Mac OS
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)0.65 W
Power consumption (average operating)19.5 W
Package weight10900 g

Related product manuals