EasyManuals Logo

Brother MFC-J410 Basic User's Guide

Brother MFC-J410
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
Troubleshooting
55
B
Cannot Detect You installed a new ink cartridge
too quickly and the machine did
not detect it.
Take out the new ink cartridge and
re-install it slowly until it clicks.
If you are using non Brother
Original ink the machine may not
detect the ink cartridge.
Replace the cartridge with a Brother
Original ink cartridge. If the error message
remains, contact your Brother dealer.
An ink cartridge is not installed
correctly.
Take out the new ink cartridge and re-
install it slowly until it clicks. (See
Replacing the ink cartridges on page 48.)
Cannot Print
Replace Ink
One or more of the ink cartridges
have reached the end of their life.
The machine will stop all print
operations. While memory is
available, monochrome faxes will
be stored in the memory. If a
sending machine has a colour fax,
the machine's “handshake” will
ask that the fax be sent as
monochrome.
Replace the ink cartridges. (See Replacing
the ink cartridges on page 48.)
Comm.Error Poor telephone line quality
caused a communication error.
If the problem continues, call the telephone
company and ask them to check your
telephone line.
Cover is Open The scanner cover is not
completely closed.
Lift the scanner cover and then close it
again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it
clicks.
Data Remaining Print data is left in the machine's
memory.
Press Stop/Exit. The machine will cancel
the job and clear it from the memory. Try to
print again.
Disconnected The other person or other
person's fax machine stopped the
call.
Try to send or receive again.
Document Jam The document was not inserted or
fed correctly, or the document
scanned from the ADF was too
long.
(See Using the ADF (MFC-J410 and
MFC-J415W only) on page 20.)
(See Document jam (MFC-J410 and
MFC-J415W only) on page 59.)
High Temperature The print head is too warm. Allow the machine to cool down.
Error Message Cause Action

Table of Contents

Other manuals for Brother MFC-J410

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J410 and is the answer not in the manual?

Brother MFC-J410 Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)33 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Grayscale levels256
Image formats supportedBMP, JPG, PNG, TIF
Copier resize- %
PC free copyingYes
Maximum copy resolution1200 x 1200 DPI
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
Total number of input trays1
Card reader integratedNo
Sound pressure level (printing)50 dB
DisplayLCD
Display diagonal1.9 \
Market positioningHome & office
Maximum print size216 x 297 mm
Paper tray media typesEnvelopes, Glossy paper, Photo paper, Plain paper, Transparencies
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Dimensions (WxDxH)390 x 375 x 180 mm
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print
Compatible operating systemsWindows 2000/XP/Vista/7 Mac OS
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)0.65 W
Power consumption (average operating)19.5 W
Package weight10900 g

Related product manuals