Brother MFC-J4335DW

Level 3 Level 4 Level 5 Level 6 Descriptions
WLAN(Wi-Fi) WLAN Status SSID
- View the current SSID.
Comm. Mode
- View the current Communication mode.
MAC Address
- - View the machine's MAC address.
Wi-Fi Direct Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group Owner.
Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Device
Information
Device Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
IP Address
- View your machine's current IP Address.
Status
Information
Status
- View the current Wi-Fi Direct network
status.
Signal
- View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection on or
off.
NFC
- - - Turn the NFC function on or off.
Message from
Brother
Message from
Brother
- - Display messages and notifications from
Brother.
Status
- -
Web Connect
Settings
Proxy Settings Proxy Connection
- Change the Web connection settings.
Address
-
Port
-
User Name
-
Password
-
Network I/F
- - - Select the network connection type.
IPsec
- - - IPsec is an optional security feature of
the IP protocol that provides
authentication and encryption services.
We recommend contacting your network
administrator before changing this
setting.
Network Reset
- - - Restore all network settings back to the
factory settings.
598