Brother MFC-J4410DW - Page 19

19
For Wireless Network Users
Wireless Network
For method b, start your wireless setup by pressing the Wi-Fi button on the Touchscreen.
SSID (Network Name) / Network Key
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Item Record the current wireless network settings
SSID (Network Name)
Network Key
* The Network Key may also be described as the Password, Security Key or Encryption Key.
NOTE
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information?
1) You should see the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator or internet provider.
b Manual setup from the control panel using the Setup Wizard (Windows
®
, Macintosh and
mobile devices)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,
write down the wireless network settings of your wireless access point/router in the area above.
Now go to
page 22
c
One-push setup using WPS or AOSS™ (Windows
®
, Macintosh and mobile devices)
If your wireless access point/router supports automatic wireless (one-push) setup (WPS or AOSS™),
you can find instructions in the Network User’s Guide on the CD-ROM. To set up your machine in any
other wireless environment (Ad-hoc mode) you can find instructions in the Network User’s Guide on
the CD-ROM.