Brother MFC-J4710DW - Touchscreen LCD Brightness & Timer

Chapter 1
4
Touchscreen LCD 1
Setting the backlight
brightness 1
You can adjust the brightness of the
Touchscreen LCD backlight. If you are having
difficulty reading the LCD, try changing the
brightness setting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display LCD Settings.
f Press LCD Settings.
g Press Backlight.
h Press Light, Med or Dark.
i Press .
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after the last finger press.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display LCD Settings.
f Press LCD Settings.
g Press Dim Timer.
h Press 10Secs, 20Secs, 30Secs or
Off.
i Press .