Brother MFC-J491DW - Send a Fax Manually

Home > Fax > Send a Fax > Send a Fax Manually
Send a Fax Manually
Manual fax transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax.
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
1. Load your document.
2. Press (FAX).
3. Press Hook and listen for a dial tone.
4. Enter the fax number.
5. When you hear fax tones, press Black Start or Color Start.
• If you are using the scanner glass, press c to send a fax.
MFC-J690DW/MFC-J895DW
1. Load your document.
2. Press [Fax].
(MFC-J895DW)
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
3. Press [Hook] and listen for a dial tone.
4. Enter the fax number.
5. When you hear fax tones, press [Fax Start].
• If you are using the scanner glass, press [Send].
Related Information
• Send a Fax
198