Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the
Remote Codes
Use the Remote Codes
Fax Receive Code
If you answer a fax call on an extension telephone, you can tell your machine to receive it by pressing the Fax
Receive Code *51. Wait for the chirping sounds then replace the handset.
If you answer a fax call at the external telephone, you can make the machine receive the fax by pressing the
Start button and then selecting the option to receive.
Telephone Answer Code
If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T ring (pseudo/double-ring)
after the initial Ring Delay. If you pick up the call on an extension telephone you can turn the F/T ring off by
pressing #51 (make sure you press this between the rings).
If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the
external telephone by pressing [Pickup] or by pressing Hook.
Related Information
• External and Extension Telephones
• Change the Remote Codes
• Set a Remote Access Code
• Set Easy Receive
279
To Next Page
Loading...
Need help?
General
Weight and Dimensions
