Home > Security > Lock the Machine Settings > About Using TX Lock > Change the TX Lock Password
Change the TX Lock Password
Related Models: MFC-J491DW/MFC-J497DW/MFC-J690DW
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW
MFC-J491DW/MFC-J497DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [TX Lock]. Press OK.
d. Select [Set Password]. Press OK.
3. Enter the four-digit number of the current password. Press OK.
4. Enter a four-digit number for the new password. Press OK.
5. Re-enter the new password. Press OK.
6. Press Stop/Exit.
MFC-J690DW
1. Press
[Settings] > [All Settings] > [Fax] > [Miscellaneous] > [TX Lock] > [Set
Password].
2. Enter the four-digit number of the current password using the touchscreen. Press [OK].
3. Enter a four-digit number for the new password using the touchscreen. Press [OK].
4. When the touchscreen displays [Verify], re-enter the new password using the touchscreen. Press [OK].
5. Press
.
Related Information
• About Using TX Lock
374