To print on Photo (10 15 cm) or Photo L
(89 127 mm) paper, you must use the
photo paper tray. (See Loading photo
paper on page 24.)
Load only one size of paper and one type of
paper in the paper tray at any time.
(For more information about paper size,
weight and thickness, see Choosing the right
print media on page 30.)
a Pull the paper tray completely out of the
machine.
• If the paper support flap (1) is open, close
it, and then close the paper support (2).
• When you load a different paper size in
the tray, you will need to change the paper
size setting in the menu of the machine at
the same time.
(See Paper Size on page 27.)
b Lift the output paper tray cover (1).
Loading paper
2
2
1
To Next Page
Loading...
