Brother MFC-J650DW - Setting the Date and Time

88
d Press OK.
The machine starts printing the
Alignment Check Sheet.
e For the “A” pattern, press a or b to
display the number of the test print that
has the least visible vertical stripes
(1-9), and then press it.
Press OK.
Repeat this step for the B, C and D
patterns.
In the example number 6 is the best
choice for A, B, C and D.
f Press .
NOTE
Setting the date and
time
A
The Touchscreen displays the date and time.
If it is not current, follow these instructions to
re-enter it.
You can add the date and time to each fax
you send by setting your Station ID.
a Press (Settings).
b Press All Settings.
c Press a or b to display
Initial Setup.
d Press Initial Setup.
e Press a or b to display Date & Time.
f Press Date & Time.
g Press Date.
h
Enter the last two digits of the year on
the Touchscreen, and then press OK.
i Enter the two digits for the month on the
Touchscreen, and then press OK.
j Enter the two digits for the day on the
Touchscreen, and then press OK.
k Press Time.
l Enter the time (in 24-hour format) using
the keyboard on the Touchscreen.
Press OK.
(For example, enter 19:45 for 7:45 PM.)
m Press .
i
When the print
alignment is not
adjusted properly,
text looks blurry
like this.
After the print
alignment is
adjusted properly,
text looks like this.