Receiving a fax
23
4
d Enter a four-digit secure code.
This is the same as the security code of
the fax machine you are polling.
Press OK.
e Enter the fax number you are polling.
f Press Mono Start or Colour Start.
Setup to receive delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (FAX).
b Press a or b to choose Polling RX.
c Press d or c to choose Timer.
Press OK.
d Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
e Enter the fax number you are polling.
f Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling
(Monochrome only)
4
Sequential polling lets you request
documents from several fax machines in one
operation.
a Press (FAX).
b Press a or b to choose Polling RX.
c Press d or c to choose Standard,
Secure or Timer.
d Do one of the following:
If you chose Standard, press OK
and then go to step e.
If you chose Secure, press OK and
then enter a four-digit number.
Press OK, go to step e.
If you chose Timer, press OK and
then enter the time (24-hour format)
you want to begin polling.
Press OK, go to step e.
e Press a or b to choose Broadcasting.
Press OK.
f Do one of the following:
Press a or b to choose Add Number
and enter the number using a dial
pad.
Press OK.
Press a or b to choose Phone Book
and OK. Press a or b to choose
Alphabetic Order or
Numeric Order and OK. Press
a or b to select a number and OK.
If you chose Numeric Order:
Speed Dial numbers start with #.
One Touch numbers start with l.
g After you have entered all the fax
numbers by repeating step f, press
a or b to choose Complete.
Press OK.
h Press Mono Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting jobs
on page 13.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
