Brother MFC-J6710DW - 1 General Setup; Memory Storage; Setting Daylight Saving Time

1
1
1
Memory storage 1
Even if there is a power failure, you will not
lose the settings you have chosen using the
Menu key because they are stored
permanently. Also, you will not lose your
settings in the FAX, SCAN, COPY and
PHOTO CAPTURE mode key menus if you
have chosen Set New Default. You may
have to reset the date and time.
Note
During a power failure the machine will
retain messages that are in the memory
for approximately 24 hours.
Setting Daylight
Saving Time
1
You can set the machine to change for
daylight saving time. It will reset itself forward
one hour in the Spring and backward one
hour in the Autumn. Make sure you have set
the correct date and time in the Date&Time
setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Daylight Save.
d Press d or c to choose Off (or On).
Press OK.
e Press Stop/Exit.
General setup 1