Outlining
Correct outline style Incorrect outline style
• Use a red pen or marker with a tip width of 1.0 mm-10.0 mm, that is, from an extra-fine tip up to an extra-
thick marker tip.
• Outlined areas with thick red lines are easier to recognise. However, do not use a pen or marker with a tip
wider than indicated above.
• The red outline must not be broken and the line must not cross more than once.
• The outlined area must have a length and width of at least 1 cm.
• If the paper has a dark background colour, the outlined area may be difficult to recognize.
Related Information
• Brother Web Connect
• Outline and Scan a Document to the Cloud
• Outline and Scan a Document to a USB Flash Drive Using Brother Web Connect
• Copy an Outlined Section Using Brother Web Connect
• Cut an Outlined Section Using Brother Web Connect
542