Brother MFC-J805DW

Level 1 Level 2 Level 3 Descriptions
WLAN TCP/IP APIPA
Set the machine to allocate the IP address from
the link-local address range automatically.
IPv6
Turn the IPv6 protocol on or off.
Setup Wizard
- Configure your wireless network settings
manually.
WLAN Assistant
- Configure your wireless network settings using
the Brother installation disc.
WPS
- Configure your wireless network settings using
the one-button push method.
WPS w/ PIN Code
- Configure your wireless network settings using
WPS with a PIN.
WLAN Status Status
View the current wireless network status.
Signal
View the current wireless network signal
strength.
SSID
View the current SSID.
Comm. Mode
View the current Communication mode.
MAC Address
- View the machine's MAC address.
Wi-Fi Direct Push Button
- Configure your Wi-Fi Direct network settings
using the one-button push method.
PIN Code
- Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Manual
- Configure your Wi-Fi Direct network settings
manually.
Group Owner
- Set your machine as the Group Owner.
Device
Information
Device Name
View your machine's device name.
SSID
View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
IP Address
View your machine's current IP Address.
Status
Information
Status
View the current Wi-Fi Direct network status.
Signal
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
I/F Enable
- Turn the Wi-Fi Direct connection on or off.
Web Connect
Settings
Proxy Settings Proxy Connection
Change the Web connection settings.
Address
Port
User Name
Password
WLAN Enable
- - Turn the wireless network connection On or Off.
Network Reset
- - Restore all network settings back to the factory
settings.
660