Brother MFC-J805DW

Settings > [Print Reports]
Level 1 Descriptions
Transmission
Print a Transmission Verification Report for your last transmission.
Address Book
Print a list of names and numbers stored in the Address Book.
Fax Journal
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
User Settings
Print a list of your settings.
Network Config
Print a list of your Network settings.
WLAN Report
Print the wireless LAN connection results.
Caller ID History
Print a list of the available Caller ID information about the last 20 received faxes and
telephone calls.
Settings > [Machine Info.]
Level 1
Descriptions
Serial No.
Check your machine's serial number.
Firmware Version
Check your machine's firmware version.
Firmware Update
Update your machine to the latest firmware.
Firmware Auto Check
View firmware information on the Home screen.
Settings > [Initial Setup]
Level 1
Level 2 Descriptions
Date & Time Date
Add the date and time on the screen and in the headings of the
faxes you send.
Time
Clock Type
(USA and Canada
only)
Select the time format (12-hour or 24-hour).
Auto Daylight
(USA and Canada
only)
Set the machine to change automatically for Daylight Saving
Time.
Station ID
- Enter your name and fax number so it appears on each page
you fax.
Tone/Pulse
(Available only for some
countries.)
- Select the dialing mode.
Fax Auto Redial
- Set the machine to redial the last fax number if the fax did not go
through because the line was busy.
Dial Tone
- Shorten the dial tone detect pause.
Compatibility
- Adjust the equalization for transmission difficulties.
VoIP service providers offer fax support using various standards.
If you regularly experience fax transmission errors, select Basic
(for VoIP).
Reset Machine Reset
Restore all the machine's settings that you have changed, such
as Date and Time and Ring Delay.
Network
Restore all network settings back to the factory settings.
Address Book &
Fax
Erase all stored phone numbers and fax settings.
All Settings
Restore all the machine's settings back to the factory settings.
661