3
Fan the stack of paper to prevent further
jams, and slide the paper guides to fit
the paper size.
4
Make sure the paper is below the
maximum paper mark (b b b).
5
Put the paper tray firmly back in the
machine.
Paper is Jammed in the Back of the
Machine
If the machine's control panel or the Status
Monitor indicates that there is a jam in the
back (Rear) of the machine, follow these
steps:
1
Leave the machine turned on for 10
minutes for the internal fan to cool the
extremely hot parts inside the machine.
2
Open the back cover.
3
Pull the green levers at the left and right
sides toward you to release the fuser
cover.
A
Troubleshooting
55
To Next Page
Loading...
Need help?
General
