Confidential
2-7
Parts Names Functions
Switchback actuator This detects whether the printed recording papers 
are ejected.
This detects the ending edge of recording paper 
after printing the first side when duplex-printing, 
adjusting timing to reverse the switchback roller 
rotation.
This detects paper jamming in the ejector.
Switchback roller
This ejects the recording paper to the output paper tray.
During duplex-printing, after feeding some of the 
recording papers printed in the first side to the 
switchback roller, its rotation is reversed to feed the 
recording paper to the duplex-printing path.
Duplex paper feed roller During duplex-printing, this feeds the recording 
paper that are fed in the duplex paper path to the 
paper feed roller.
After the registration actuator detects the leading 
edge of the paper, it pushes the recording paper 
against the stopping paper feed roller, and corrects 
inclination of the paper.
MP paper pull-in roller This feeds the recording paper from the MP tray to 
the paper feed roller.
After the registration actuator detects the leading 
edge of the paper, it pushes the recording paper 
against the stopping or reverse-rotating paper feed 
roller, and corrects inclination of the paper.
MP paper detection actuator This detects whether the recording paper are set 
on the MP tray.
T3 paper pull-in roller This feeds the recording paper from the paper tray 
#3 to the Intermediate roller.
After the 3rd tray paper pull-in actuator detects the 
leading edge of the paper, it pushes the recording 
paper against the reverse-rotating or stopped 
intermediate roller, and corrects inclination of the 
paper.
Intermediate roller This feeds the recording paper from the T3 paper 
pull-in roller to the paper feed roller.
After the registration actuator detects the leading 
edge of the paper, it pushes the recording paper 
against the reverse-rotating or stopped paper feed 
roller, and corrects inclination of the paper.
3rd tray paper pull-in actuator This detects the leading edge of recording paper 
and switches drive from the T3 paper pull-in roller 
to intermediate roller.