Routine maintenance
31
A
c Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d Wipe the inside and outside of the paper
tray with a dry, soft lint-free cloth to
remove dust.
e Close the output paper tray cover and
put the paper tray firmly back in the
machine.
Cleaning the machine’s
printer platen A
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid an electrical shock.
a Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
DO NOT touch the encoder strip (2).
Doing this may cause damage to the
machine.
2
1
To Next Page
Loading...
