31
Ch. 3 Functions
Functions
To change the setting for the Frame func-
tion:
1 Select GLOBAL FORMAT, BLOCK FORMAT
or LINE FORMAT (OR hold down d and
press 1, 2 or 3) as described on
pages 24 to 25.
2 Rotate r until FRAME is displayed, and
then press r (OR press j or k until
FRAME is displayed). The setting for the text
at the cursor’s current position is shown on
the left side of the display and a sample can
be seen on the right side.
3 Rotate r (OR press m or g) until the
desired setting is displayed.
4 Press r (OR press n) to apply the setting.
Text alignment function
(ALIGNMENT)
You can choose to align the text in one of four
ways:
In addition, if the Text rotation function is set to
OFF, the text will align within the length set with
the Block length function. If the Text rotation
function is set to any setting other than OFF, the
text will align within the width of the tape. The
alignment of the text at the cursor’s current posi-
tion is shown at the top of the display.
NOTE
This step may be skipped if settings for several for-
mat functions are being applied at the same time.
NOTE
☞ Even if a frame setting has already been applied
to either a line in the current text block (if the
Block format or the Global format Frame func-
tion is being set) or a block in the current text (if
the Global format Frame function is being set),
all frames will be applied and printed.
☞ To return the function to its default setting
(OFF), press the space bar.
☞ To return to the text without changing the for-
matting, press e (OR hold down d and
press 1, 2 or 3).
Length Margin Font Width Size
1 2 3 4 5 6 7 8 9 A B C D E F K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
L
M
NO
AUTO 0.4 HELSINKI A AUTO
<<< P-touch >>>
1
:
_
Length Margin Font Width Size
1 2 3 4 5 6 7 8 9 A B C D E F K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
AUTO 0.4 HELSINKI A AUTO
07/13
FRAME
OFF
L
M
NO
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format settings
at the same time, press j or k to select the func-
tion, and then press m or g to select the desired
setting. Press n only after the necessary functions
have been set.
LEFT
CENTRE
RIGHT
JUSTIFY
Length Margin Font Width Size
1 2 3 4 5 6 7 8 9 A B C D E F K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
L
M
NO
AUTO 0.4 HELSINKI A AUTO
<<< P-touch >>>
1
:
_
To Next Page
Loading...
Need help?
General