Brother P-Touch 9600 - Page 49

39
Ch. 3 Functions
Functions
0 Press r (OR press n) to print the label.
The message “COPIES 1/ 1” appears in the
display while the label is being printed. The
MENU screen appears in the display again.
To change the text entered in the template:
A Rotate r (OR press m or g) until 9
moves beside CONTINUE.
B Press r (OR press n). The first field for
the selected template appears in the display.
C Repeat step 4 until the text is edited as you
wish. The MENU screen appears again
when r (OR n) is pressed after editing
the last field in the template.
To finish using the Auto format function:
D Rotate r (OR press m or g) until 9
moves beside FINISH.
E Press r (OR press n). The message “OK
TO FINISH AUTO FORMAT?” appears in
the display.
F Press r (OR press n). Any text displayed
before the Auto format function was used
reappears in the display.
Length Margin Font Width Size
1 2 3 4 5 6 7 8 9 A B C D E F K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
AUTO 0.4 HELSINKI A AUTO
03/04 FINISH
MENU CONTINUE
CHANGE STYLE
L
M
P
P
Length Margin Font Width Size
1 2 3 4 5 6 7 8 9 A B C D E F K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
AUTO 0.4 HELSINKI A AUTO
02/04 PRINT
MENU FINISH
CONTINUE
L
M
P
P
NOTE
☞ The template that was last used appears first.
Selecting this template displays the text that was
entered in it at that time.
☞ An Auto format template that has been stored in
the memory can be recalled and used again. For
details on recalling stored Auto format tem-
plates, refer to page 45.
☞ To quit the Auto Format function without using
a template, hold down d and press 6 at
any time.
☞ The half cut can only be used to cut laminated
tape.