Brother P-TOUCH CUBE PT-P300BT User Manual

Press the Power Button to power on. Hold the Power Button for 0.5 seconds to power off.
The label printer's LED indicates the label printer's status.
4. Turn the Label Printer On or Off
5. LED Indications
LED Condition
Not lit Power Off
Steady green light
 &RQQHFWLQJWR\RXUPRELOHGHYLFH
 )HHGLQJRUFXWWLQJWDSH
3ULQWLQJ
Flashing green light
(Lit for 3 seconds, then off for 1
second)
Standby
Flashing green light
(0.5 second intervals)
Receiving data from your mobile device.
Flashing orange light
(1 second intervals)
Insufficient charge or battery failure.
LED Condition
How to Clear
an Error
Solution
Steady red light Booting
Transfer the program again.
If the problem is still not resolved, contact
Brother Customer Service.
Flashing red light
(1 second
intervals)
 1R7DSH&DVVHWWHLQVWDOOHG
 ,QFRUUHFW7DSH&DVVHWWH
installed.
 ,QFRPSDWLEOH7DSH&DVVHWWH
installed.
Lightly press the
Power Button.
Insert the correct
Tape Cassette.
The machine failed to
communicate with your
mobile device.
Restart the label
printer.
Connect via
Bluetooth and try
sending the label
from your mobile
device to the
machine again.
Cutter error Lightly press the Power Button.
Incompatible AC Adapter used Use the correct AC Adapter.
Flashing red light
(0.5 second
intervals)
System error
Please contact Brother Customer
Service.

Brother P-TOUCH CUBE PT-P300BT Specifications

General

Model	PT-P300BT
Print Technology	Thermal Transfer
Maximum Resolution	180 dpi
Maximum Print Speed	20 mm/sec
Connectivity	Bluetooth
Mobile Device Compatibility	iOS, Android
Compatible Tape	Brother TZe tapes
Cutter	Manual
Max. Label Length	300 mm
Tape Width	3.5mm, 6mm, 9mm, 12mm
Power Source	6 AAA Batteries or AC Adapter (not included)
Mobile App	P-Touch Design&Print
Weight	380 g
Dimensions	115 mm x 115 mm x 61 mm