2. Select [Feed & Cut] using the or key, and then press the OK or
Enter key. The message [Feeding Tape... Please Wait] appears
while the tape is fed, and then the tape is cut.
Feed Only
This function will eject the tape approximately 22.3 mm, resulting in a blank
label sticking out of the tape cassette. This action is recommended when
using Fabric tapes, which should be cut using scissors.
1. Press the (Feed and Cut) button.
[Feed & Cut?] appears on the LCD.
2. Select [Feed Only] using the or key, and then press the OK or
Enter key. The message [Feeding Tape... Please Wait] appears
while the tape is fed.
Language
1. Select [Settings] in the Home screen using the , , or key,
and then press the OK or Enter key.
2. Select [ Language] using the or key, and then press the OK
or Enter key.
3. Select a language for menu commands and messages shown on the
LCD using the or key.
The following languages are available: [English], [Tiếng Việt], and
[Türkçe].
4. Press the OK or Enter key.
Unit
1. Select [Settings] in the Home screen using the , , or key,
and then press the OK or Enter key.
2. Select [Unit] using the or key, and then press the OK or Enter
key.
3. Select a unit for dimensions shown on the LCD using the or key.
Either [inch] or [mm] can be selected.
4. Press the OK or Enter key.
The indicators light and flash to indicate the P-touch labeller’s status. The
symbols used in this section explain the meaning of the different indicator
colours and patterns:
Example: G = Indicator is flashing in green
Tube, Label, Power indicator
Battery indicator
Wi-Fi indicator
To exit or cancel this function press the Esc key.
To exit or cancel this function press the Esc key.
Setting Language and Unit
To return to the previous step, press the Esc key.
The default setting is [mm].
To return to the previous step, press the Esc key.
LED Indicators
= Indicator is lit
G = Green
O = Orange
R = Red
= Indicator is flashing
= Indicator can be off, lit or flashing in any colour
(Off) = Indicator is off
(Tube)
(Label) (Power)
Condition
(Off) (Off)
O
Power is turning off
Top cover open
(Off) (Off)
G
(1 time in 1
second)
Transferring data
O
Now cooling
(Off)
RR
System error 1
System error 2
System error 3
(Off)
G
O
Reset mode (when the
mode is starting)
(Off)
GO
Reset mode (when the
button is pressed 2/4/6
times)
G
(1 time in 2
seconds)
(Off) In pause mode (Tube)
(Off) (Off)
G
(2 times in 1.8
seconds)
In cutting mode (Tube)
(Off)
G
In pause mode (Label)
(Battery)
(Power)
Condition
(Off)
Rechargeable battery
power: full
O
Charging
O
(1 time in 4 seconds)
Rechargeable battery
power: half
O
(2 times in 4 seconds)
Rechargeable battery
power: low
RR
Rechargeable battery error
R
G
Rechargeable battery
power: empty
OO
Adapter
connection/disconnection
error
(Wi-Fi)
(Power)
Condition
RO
No available WPS access
point was found
RO
WPS access point
connection error
R
(2 times in 1.8 seconds)
O
Incorrect security settings
O
(2 times in 1.8 seconds)
O
WPS access point search
error
G
Wi-Fi on, not connected
G
Wi-Fi on, connected
(Off) Wi-Fi off