HELPFUL HINTS
Reset your P-touch labeling system when you want
to initialise the settings, or in the event it is not
working correctly. Resetting clears all the text,
settings, and stored files.
1 Turn off the P-touch labeling system, hold
down and , and then press to
turn the P-touch labeling system back on.
2 First release the power button, and then
release and .
The P-touch labeling system turns on with
the internal memory reset.
NOTE
Contact Information Website: www.brother.ca
Shortcuts
Language
Space key
Undl/Frame
Label Length
Margin
CableRot/Rpt
File
Tab
Tab Length
Unit
LCD contrast
Resetting the P-touch
Labeling System
CAUTION
USING A COMBINATION OF DIFFERENT
BATTERIES (SUCH AS ALKALINE WITH
Ni-MH), MAY RESULT IN AN EXPLOSION.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
• Remove the batteries if you do not intend to
use the P-touch labeling system for an
extended period of time.
• Dispose of batteries at an appropriate
collection point, not in the general waste
stream. Be sure to observe all applicable
federal, state, and local regulations.
• When storing or discarding a battery, wrap it
with cellophane tape to prevent it from short-
circuiting (see illustration).
1. Cellophane tape
2. Alkaline or Ni-MH battery
Do not mix old and new
batteries. Replace all six batteries at the same
time.
Awesome support comes standard with us.
So if you ever consider returning this product,
contact us first at:
www.brother.ca/support
Live Chat with us or reach us on
facebook.com/brothercanada
or
twitter.com/Brother_Support
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
