Brother P-touch PT-E110 User Manual

BASIC USAGE
You can enter a maximum of 80 characters and
spaces for each text label.
To cancel any operation, press .
 Switching Upper Case / Lower Case
 Creating Two-Line Tapes
Move the cursor to where you want to start the
next line and press . Use either 9 mm or
12 mm tape for two-line printing.
NOTE
• The return symbol ( ) appears when you press
the Enter key .
 Entering Tabs
The tab symbol appears when you insert a
tab in the text.
 Changing Tab Length
• To return to the default tab length, press the
Space key.
• Please note: the default length varies based
on your tape size.
 Cursor Keys
To move to the end of your text:
+
To move to the beginning of your text:
+
 Entering Accented Characters
• See the Accented Characters table in this
guide.
• The order of accented characters varies
based on the language you selected.
Entering Text
2
Upper case
( ON)
Lower case
( OFF)
Line 1 The image
Line 2
Caps
Caps
/ [Tab]
/ [Tab Length]
/ [Auto / 0-100mm]
- / /
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Brother P-touch PT-E110 Specifications

General

Model	PT-E110
Category	Label Maker
Print Resolution	180 dpi
Maximum Tape Width	12 mm
Keyboard Type	QWERTY
Display	LCD
Cutter Type	Manual
Print Speed	20 mm/sec
Tape Sizes	3.5mm, 6mm, 9mm, 12mm
Number of Fonts	1
Built-in Symbols	200
Multi-Block Printing	No
Memory	No
Print Method	Thermal Transfer
Tape Type	TZe tape
Font Styles	Normal, Outline, Shadow
Max. Label Length	300 mm
Weight	400 g (without batteries)
Power Source	6 x AAA batteries (LR03/HR03) (not included)