Brother P-touch PT-E110 User Manual

1 Turn on your P-touch labeling system.
Supply power using six AAA batteries or the optional AC Adapter (AD-24ESA), and then press
to turn on the power.
2 Set the language.
The default setting is [English].
3 Set the unit of measurement.
The default setting is [mm].
NOTE
• The P-touch labeling system automatically turns off if it is inactive for five minutes.
• To cancel any operation, press .
• To return to the default setting, press the Space key.
Use this function to set LCD brightness. There are five levels from [-2] (darkest) to [+2] (brightest).
The default setting is [0].
NOTE
• To return to the default setting, press the Space key.
Initial Settings
/ [Language] /
[English/Español/Français/Hrvatski/Italiano/Magyar/Melayu/Nederlands/Norsk/
Polski/Português/Portug. (BR)/Românã/Slovenski/Slovenský/Suomi/Svenska/
Türkçe/Čeština/Dansk/Deutsch]
/ [Unit] / [inch/mm]
Contrast
/ [LCD contrast] / [-2 / -1 / 0 / +1 / +2]
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Brother P-touch PT-E110 Specifications

General

Model	PT-E110
Category	Label Maker
Print Resolution	180 dpi
Maximum Tape Width	12 mm
Keyboard Type	QWERTY
Display	LCD
Cutter Type	Manual
Print Speed	20 mm/sec
Tape Sizes	3.5mm, 6mm, 9mm, 12mm
Number of Fonts	1
Built-in Symbols	200
Multi-Block Printing	No
Memory	No
Print Method	Thermal Transfer
Tape Type	TZe tape
Font Styles	Normal, Outline, Shadow
Max. Label Length	300 mm
Weight	400 g (without batteries)
Power Source	6 x AAA batteries (LR03/HR03) (not included)