What to do if layout style was not updated on Brother Label Maker?
If, after replacing the Roll while the Add-In feature was activated, the layout style was not updated on your Brother Label Maker (Windows® only), close the P-touch Editor to exit the Add-In, and then reactivate the Add-In.
Why does Brother QL-710W/720NW printer pause and then continue printing via USB?
If the Brother Label Maker printer repeatedly pauses and then continues printing when printing via the USB cable, check if the printer is set for sequential printing. If it is, change the print mode to buffered printing. Alternatively, try disconnecting the LAN cable until USB printing is complete.
General| Automatic Cutter | Yes |
|---|---|
| Print Resolution | 300 dpi |
| Maximum Print Width | 62 mm |
| Maximum Label Width | 62 mm |
| Label Width | 62 mm |
| Connectivity | USB, Wi-Fi (QL-720NW only) |
| Supported Label Types | Die-cut and continuous |
| Compatible Operating Systems | Windows, Mac |
| Power Supply | AC adapter |
| Max Label Length | 1000 mm |
Steps to uninstall software and user's guide on Windows operating systems.
Procedure for removing the printer driver on various Windows versions.
Instructions for uninstalling P-touch Editor software on Macintosh.
Steps to remove the printer driver on Macintosh operating systems.
General steps for connecting the printer to a PC or Mac for label creation.
Procedure for using the printer independently on Windows machines.
Guide on how to start and use the QL Utility for printer settings on Windows.
Instructions for launching and using the QL Utility on Macintosh computers.
Configure printer information output, command mode, and baud rate.
Information on how the DK Roll automatically cleans the print head.
Procedure for cleaning the label outlet if it jams due to glue.
Overview of common issues encountered with the printer and their solutions.
To Next Page