Brother RJ-4030 - NN Specify Number of Numbering Copies; ID Initialize Template Data

P-touch Template 2.0 Command Reference
- 44 -
7. Control Command Details
^NN Specify number of Numbering copies
ASCII: ^ N N n1 n2 n3
Decimal: 94 78 78 nd1 nd2 nd3
Hexadecimal: 5E 4E 4E nh1 nh2 nh3
Parameters
0≤n1≤9
0≤n2≤9
0≤n3≤9
Description
z Specifies the number of copies to be printed with Numbering.
(n1*100)+(n2*10)+n3: Number of Numbering copies (bytes) (1 to 999)
z The default number of copies printed with Numbering is 1.
Remarks
z When printing is finished, the number of copies specified with this command returns to the number of
copies (static value) specified from the printer.
Example
z To change the number of Numbering copies to 100:
Since n1=1, n2=0 and n3=0, the command will be as follows.
^ N N 1 0 0
(5Eh 4Eh 4Eh 31h 30h 30h)
^ID Initialize template data
ASCII: ^ I D
Decimal: 94 73 68
Hexadecimal: 5E 49 44
Parameters
None
Description
z Returns the data in the selected template to what it was when the template was transferred.