Brother TD-2020 - Touch Panel

Chapter 10
70
4 Battery level display
When the rechargeable Li-ion battery
(optional) is being used, the remaining charge
is indicated.
If you continue to use the printer while the
battery has a low charge, the message
“Recharge Battery!” appears, and the
printer may run out of power, even while
printing.
: Full charge
: Half
: Low charge
: Charging
5 Indicators for available wireless interfaces
If wireless connection settings have been
specified, the marks for the available interfaces
appear.
: Bluetooth
, , , : Wireless LAN
(The connection status is shown at four
different levels, and appears when there
is no connection.)
6 Touch panel setting
Displays whether the touch panel display has
been set for touch panel A or B.
: Basic control panel (A)
: One-touch panel (B)
Touch Panel 10
There are two touch panels: the basic control
panel (A) and the one-touch panel (B). Either
can be selected for use.
Press a key on the touch panel to perform an
operation.
If a label layout has been assigned in
advance to a key on the one-touch panel, a
label can easily be printed simply by pressing
the key of the corresponding label.
Basic control panel (A) 10
One-touch panel (B) 10
Do not press on the touch panel with a
sharp object. Otherwise, the touch
panel may be damaged.
1
2
6
7
3
4
5
8
4
3
1
2