ASSEMBLY TO TRACTOR
SECTION 2.
SET-UP INSTRUCTIONS.
Remove Conveyor from Tractor. 2-01
Install Conveyor to Tractor. 2-01
Install Track Rod. 2-01
Connect Hydraulic Hoses. 2-02
Connect Electrical Harness. 2-02
Install F-Frame. 2-02
Install Caster Wheel. 2-03
Remove RollMax Unit from Shipping Stand. 2-03
Install Rollmax Unit to F-Frame. 2-03
Adjust Dump Conveyor Stop Bolt. 2-03
Connect RollMax Unit Hydraulic Hoses. 2-04
Install Unload Ramp. 2-04
Attach Ramp Spring and Transport Chain. 2-04
Canopy Installation.
Canopy Installation Contents. 2-05
Fitting Canopy to Installed Canopy Frame. 2-06
Canopy Assembly Parts List. 2-07
Assembling Perimeter Frame. 2-08
Assembling Cross Brace Tubes. 2-08
Fitting Front Support Tubes. 2-08
Fitting Rear Support Tubes. 2-09
Installing Canopy Frame Assembly onto Tractor. 2-09/2-10
Connecting Wiring Harness. 2-10
To Next Page
Loading...
