291
GEARCASE – STANDARD ROTATION
SHIFTER, BEARING AND SEAL SERVICING
13
COUNTER ROTATION HOUSING
Bearing Installation Tool:
• P/N 432401 – front bearing
• P/N 354139 – rear bearing
Rear Seal Installation
Apply Gasket Sealing Compound to metal casings
of the seals before installing.
Use Seal Installation Tool to install new seals
back to back in bearing housing.
Seal Installation Tool:
• P/N 354056 – “L2”, “M2”
Install inner seal with lip facing toward the bearing
housing, then outer seal with lip facing away from
the bearing housing.
Apply Triple-Guard grease to seal lips.
Front Bearing
1. Bearing installation tool
006945
Rear Bearing
1. Bearing installation tool
006910
1
1
1. Inner seal
2. Outer seal
DR2061
DR2062
1
2
To Next Page